416 Series

The 416 Series is manufactured of 16-gauge, flush, galvanized steel exterior for enhanced strength and durability. These 2" (51mm) thick doors are available in sizes up to 32´2" in width and 21´1" in height (9804mm x 6426mm). Available with an array of options, the 416 Series can be easily customized to meet any project requirement where an extra heavy-duty door is required.

OCSS 416 pp resized 309

Standard Features At a Glance

Nominal thickness 2" (51 mm) 
Max. standard width 32'2" (6,147 mm)
Max. standard height 21'1" (7,341 mm)
Exterior Steel 16-gauge hot-dipped galvanized steel
Exterior surface Flush
End Stiles 16-gauge steel
Center Stiles 16-gauge steel
Standard mounting Angle mount
Standard track 2" (51 mm)
Standard springs 10,000 cycle
Weatherstripping Flexible PVC bottom with retainer
Operation Manual pull rope
Finish White baked-on polyester
Lock Interior-mounted slide lock

Options

  • Electric operator or chain hoist
  • Bottom sensing edge
  • Full sash section with 1/8" (3 mm) DSB, insulated; 1/8" (3 mm) and 1/4" (6 mm) plexiglass
  • Individual lites with 1/8" (3 mm) DSB;
    1/8" (3 mm) and 1/4" (6 mm) plexiglass;
    1/8" (3 mm) and 1/4" (6 mm) Lexan;
    1/8" (3 mm) and 1/4" (6 mm) Tempered;
    1/4" (6 mm) wired
  • 3" (76 mm) track
  • Bracket mounting (not available on full vertical)
  • Bottom sensing edge
  • Higher-cycle springs in 25k, 50k, 75k, 100k cycles
  • Exhaust ports
  • Jamb weatherseals, including Saverseal pliable blade seal
  • Bottom strips, including looped PVC weatherstrips, flexible PVC astragal weatherstrips and double-contact weatherstrips
  • Reinforcing struts of roll-formed steel
  • Movable center posts for 2" (51 mm) or 3" (76 mm) tracks that roll away, with automatic safety catches that prevent door closure when posts are removed
  • Tumbler keyed lock

Return to Sectional Steel Doors